Configuration of Google Android for eduroam network
Last modified by on 05.02.2019 11:26
Source: https://www.eduroam.cz/cs/uzivatel/sw/uvod
For the Android >= 4.3, use the eduroam CAT configuration.
You can also choose manual configuration for Android >= 7.0.
Configuration using eduroam Configuration Assistant Tool
- If you have an eduroam profile previously configured, first delete it (via "Forget network").
- From the Google Play store, download and install the "eduroam CAT" application and run it.
- If the VŠB - Technical University of Ostrava is not offered in nearby configurations, click the manual search button, type "všb" and search.
- Then choose VŠB - Technical University of Ostrava from the list of organizations.
- Install the profile.
- Fill the login name as login@vsb.cz (eg. abc123@vsb.cz) and wifi password.
Attention! In some versions of the Android OS after this step may be required lock screen using a PIN, symbols etc.!
- The eduroam profile will be configured.
- If the application reports that the profile is damaged, quit it and try again.
Manual configuration
- Go via All programs and choose Settings and then WiFi.
- Turn on WiFi and in the list of available WiFi networks search for the network eduroam.
- Choose following options:
EAP method: PEAP
CA Certificate: Use system certificates
Domain: vsb.cz
Phase 2 authentication: MSCHAPV2
Identity: The user name must be entered in form login@domain (e.g. abc123@vsb.cz). Where "login" is your VSB-TUO login name and "domain" is vsb.cz.
Password: Type your Wi-Fi password (Wi-Fi password is not identical with a single LDAP password!).
- If you did not see the "Domain" field in the previous step, click the eduroam settings, select "Modify network" and add "vsb.cz" in the "Domain" field. Confirm with the "Save" button.