Last modified by Denisa Wernerová on 03.09.2024 10:43

Hide last authors
Denisa Wernerová 2.3 1 You have to carry out following steps to gain access to the **eduroam **network:
Martin Výlet 1.1 2
Denisa Wernerová 2.3 3 **~1. Prerequisites and Warnings:**
Martin Výlet 1.1 4
Denisa Wernerová 2.3 5 * Wi-Fi card is installed in your computer. The card meets technical requirements, i.e. EAP-PEAP authentication and WPA2.
6 * Its configuration was made with Windows standard tools, not with tools provided by card manufacturer.
7 * Check that you are in the EDUROAM wireless network range.
8 * **Always turn off** your computer. Don't put it asleep (hibernate), wireless network won't wake up later!
Martin Výlet 1.1 9
10
Denisa Wernerová 2.3 11 **2. WiFi password**
Martin Výlet 1.1 12
Denisa Wernerová 2.3 13 * If is your university involved in international project eduroam (Education Roaming) then it is possible to connect to the eduroam with use the same login as in your home institution and in other universities (also involved in the project eduroam).
14 * Another possibility to use services of EDUROAM wireless network is set up [[wifi password>>uzivatel.hesla.wifi-heslo.WebHome]].
Martin Výlet 1.1 15
16
Denisa Wernerová 2.3 17 **3. TCP/IP Properties Setup:**
Martin Výlet 1.1 18
Denisa Wernerová 2.3 19 To gain IP address from DHCP server you have to setting up your wireless adapter like on this link:
Martin Výlet 1.1 20
Denisa Wernerová 2.3 21 * [[Gain an IP from DHCP server automatically and Gain DNS server address automatically must be set for TCP/IP protocol.>>tuonet.sit-nastaveni.tcp-ip.tcp-ip-wifi-win10.WebHome]]
Martin Výlet 1.1 22
Denisa Wernerová 2.3 23 (Note: You are not able to access to the network if your IP will be set manually.)
Martin Výlet 1.1 24
25
Denisa Wernerová 2.3 26 **4. Wireless Network Setup**
Martin Výlet 1.1 27
Denisa Wernerová 2.3 28 1. Click on **Find **and continue through **Control Panel → Network and Internet → Network and Sharing Center** and reference **Set up a new connection or network.**
29 \\[[~[~[image:ovladaci_panely_en.png~]~]>>attach:ovladaci_panely_en.png]]
30 \\[[~[~[image:2en.png~]~]>>attach:2en.png]]
Martin Výlet 1.1 31
Denisa Wernerová 2.3 32 1. Choose **Manually connect to a wireless network.**
33 For **Network Name** (SSID) type **eduroam **(small letters)
34 For **Security Type** choose following options:
35 1*. **WPA2-Enterprise **with **[[**AES**>>url:http://en.wikipedia.org/wiki/Advanced_Encryption_Standard]]** (the strongest security, HW and SW support is necessary).
36 1*. Click on **Start this connection automatically.**
37 After network add go to **Change connection settings**.
38 \\[[~[~[image:3en.png~]~]>>attach:3en.png]]
Martin Výlet 1.1 39
Denisa Wernerová 2.3 40 1. On **Connection **card check: **Connect automatically when this network is in range**.
41 On **Security **card, set up another configuration:
42 \\Choose **Security Type** **WPA2-business** and **Encryption Type** **AES**. (On older computers without the possibility WPA2-business + AES can configure WPA-business + TKIP.)
43 For network authentication method choose **Protokol PEAP (protected EAP)** and then click on **Settings**.
44 1*. Check **Verify the server's identity by validating the certifikate**.
45 1*. Check **Connect to these servers** and type **radius1.vsb.cz;radius2.vsb.cz;**
46 1*. Check certification authority **AAA Certificate Services**.
47 1*. Check **Don't ask user...**
48 1*. Select **Secured password (EAP-MSCHAP v2)** in **Select Authentication Method** listbox.
49 1*. Proceed by clicking the button **Configure**.
50 1*. **Uncheck **the option **Automatically use my Windows logon name and password.**
51 1*. Continue by button **Advanced settings.**
52 \\[[~[~[image:4en.png~]~]>>attach:4en.png]]
Martin Výlet 1.1 53
Denisa Wernerová 2.3 54 1. At card **802.1X protocol** settings check **Specify authentication mode** and choose **User or computer authentication**.
55 At card **802.11 protocol** settings check **Enable PMK key saving...**
56 Click **OK**.
57 \\[[~[~[image:5en.png~]~]>>attach:5en.png]]
Martin Výlet 1.1 58
Denisa Wernerová 2.3 59 1. Press **Network icon** bottom right near the clock and from shown list choose **eduroam **and **connect**.
60 If this is your first time connection or your password has changed, note the dialog for entering the credentials.
61 Use the same login as in your home institution.
62 Another possibility to use services of EDUROAM wireless network is set up [[wifi password>>doc:uzivatel.hesla.wifi-heslo.WebHome]].
63 \\The user name must be entered in form (% style="color:#cc0000" %)**login@domain**(%%) (e.g. abc123@vsb.cz).
64 Where "login" is your VSB-TUO **login **name.
65 And "domain" is **vsb.cz** .
66 Also type in the [[**wifi password**>>doc:uzivatel.hesla.wifi-heslo.WebHome]] (WiFi password is not identical with a single LDAP password!)
67 Leave Logon domain blank.