Konfigurace připojení ve Windows 10 na kolejích budovy B

NÁVOD ROZPRACOVÁN

To gain access to cable networks in building B of the dormitory must perform the following steps:

1. Setting wifi password
 

2. Import AddTrust External CA Root certificate

• If this certificate authority not on your list, you need to install it: Installation AddTrust External CA Root certificate in Windows.
   

3. Setting properties of TCP / IP protocol

• To assign an IP address from a DHCP server you must have a wireless adapter with the following settings:
  • For protocol TCP/IPv4 and IP version 6 you must have selected Obtain an IP address from a DHCP server and Obtain DNS server address automatically.

• Note .: if you have the IP address set manually (eg. from home), address will not release from a DHCP server and you do not connect to a network.
   

4. Network settings:

1. Right-click the Start icon and continue through the Computer Managment.
   
   
    
2. Select Services And Applications.
   
   
    
3. Select Services.
   
   
    
4. In the list of services, locate the service called Wired AutoConfig Service, click the right button and select Start. If it is already running, continue to the next point.
   
    
5. Again, right click and choose Properties.
   
   
    
6. On the General tab set Startup type: Automatic and click OK. Computer Management window with a list of services can be closed.
   
   
    
7. Now right click on the icon indicating access to the Internet and select Open Network and Sharing Center.
   
   
   
   
    
8. Continue through the Change adapter settings.
   
   
    
9. Right click on the Ethernet network connection and select Properties.
   
   
    
10. On the Authentication tab, check Enable IEEE 802.1X authentication, remember my Credentials for this connection each time I´m logged on and Fallback to unauthorized network access. Subsequently continue through the Settings.
    
    
     
11. Select Verify server´s identity by validating the certificate and Connect to these servers. In the text box, enter radius1.vsb.cz; radius2.vsb.cz. In the list of certificates, check AddTrust External CA Root (if it is not on your list, follow item 2 at the beginning of this manual).
    In the Notifications before connecting, select Don´t ask user to authorization new servers or trusted CAs.
    Next, press the Configure button, and make sure that the option Automatically use my Windows logon name and password ... is UNCHECKED. Select OK and OK again.
    
    
     
12. Back on the Authentication tab and select Additional Settings.
    
    
     
13. Select the option for the Specify authentication mode → User or computer Authentication. Confirm OK.
    
    
     
14. Now you should be receive the login window, where fill the login in form login@vsb.cz (eg. abc123@vsb.cz) and your wifi password. Confirm OK. Warning: it may happen that the login window is displayed in the background below the all active windows, so if you don´t see offers to log in, try to minimize all other open windows.

    

15. Now the computer should be connected to the network tuonet successfully .

* In case of any problems with connection via cable network outside the dormitory, try to deselect "Allow authentication IEEE 802.1X" in section 10 of this manual.
 

    LIMITATIONS (as long as the device is connected to a network, the steps outlined above):

• You can not use Hyper V virtual switch in the system,
• Unable to connect to the system remote desktop via protocol RDP.