Last modified by Denisa Wernerová on 29.08.2017 12:45

Show last authors
1 You have to carry out following steps to gain access to the **eduroam **network:
2
3 **~1. Prerequisites and Warnings:**
4
5 * Wi-Fi card is installed in your computer. The card meets technical requirements, i.e. EAP-PEAP authentication and WPA2.
6 * Its configuration was made with Windows standard tools, not with tools provided by card manufacturer.
7 * Check that you are in the EDUROAM wireless network range.
8 * **Always turn off** your computer. Don't put it asleep (hibernate), wireless network won't wake up later!
9
10
11 **2. WiFi password**
12
13 * If is your university involved in international project eduroam (Education Roaming) then it is possible to connect to the eduroam with use the same login as in your home institution and in other universities (also involved in the project eduroam).
14 * Another possibility to use services of EDUROAM wireless network is set up [[wifi password>>uzivatel.hesla.wifi-heslo.WebHome]].
15
16
17 **3. TCP/IP Properties Setup:**
18
19 To gain IP address from DHCP server you have to setting up your wireless adapter like on this link:
20
21 * [[Gain an IP from DHCP server automatically and Gain DNS server address automatically must be set for TCP/IP protocol.>>tuonet.sit-nastaveni.tcp-ip.win7-wifi.WebHome]]
22
23 (Note: You are not able to access to the network if your IP will be set manually.)
24 \\
25
26 **4. Wireless Network Setup**
27
28 1. Press **WinKey+I** and in shown strip **Settings** continue through **Control Panel → Network and Internet → Network and sharing Center** and reference **Set up a new connection or network.**
29
30 [[[[image:1.png||width="680"]]>>attach:1.png||rel="__blank"]]
31
32 1. Choose **Manually create a network profile.**
33
34 [[[[image:2.png||width="502"]]>>attach:2.png||rel="__blank"]]
35
36 1. For Network Name (SSID) type **eduroam **(small letters)
37 For Security Type choose following options:\\
38 1*. **WPA2-Enterprise **with **[[**AES**>>url:http://en.wikipedia.org/wiki/Advanced_Encryption_Standard]]** (the strongest security, HW and SW support is necessary).
39 1*. Click on **Start this connection automatically.**
40
41 [[[[image:3.png||width="502"]]>>attach:3.png||rel="__blank"]]
42
43 1. After network add go to **Change connection settings**.
44
45 [[[[image:4.png||width="502"]]>>attach:4.png||rel="__blank"]]
46
47 1. On **Connection **card check: **Connect automatically when this network is in range**.
48
49 [[[[image:5.png||width="311"]]>>attach:5.png||rel="__blank"]]
50
51 1. On **Security **card, set up another configuration:
52
53 Choose **Security Type** **WPA2-business** and **Encryption Type** **AES**. (On older computers without the possibility WPA2-business + AES can configure WPA-business + TKIP.)
54 For network verification choose **Protokol PEAP (protected EAP)** and then click on **Settings**.
55 1*. Check **Verify **server certificate.
56 1*. Check **Connect to these servers** and type **radius1.vsb.cz;radius2.vsb.cz;**
57 1*. Check certificate **DigiCert Assured ID Root CA**.
58 1*. Check **Do not ask user...**
59 1*. Select **Secured password (EAP-MSCHAP v2)** in **Select Authentication Method** listbox.
60 1*. Proceed by clicking the button **Configure**.
61 1*. **Uncheck **the option **Automatically use my Windows logon name and password.**
62 1*. Continue by button **Advanced settings.**
63 \\[[[[image:6.png||width="680"]]>>attach:6.png||rel="__blank"]]
64
65 1. At card **802.1X protocol** settings check **Specify authentication mode** and choose **User or computer authentication**.
66 At card **802.11 protocol** settings check **Enable PMK key saving...**
67 Click **OK**.
68
69 [[[[image:7.png||width="553"]]>>attach:7.png||rel="__blank"]]
70
71 1. Press **WinKey+I** and in shown strip **Settings **continue through icon **Available**. From shown list choose **eduroam **and **connect**.
72
73 [[[[image:8.png||width="328"]]>>attach:8.png||rel="__blank"]]
74
75 1. If this is your first time connection or your password has changed, note the dialog for entering the credentials.
76 1*. Use the same login as in your home institution.
77 1*. Another possibility to use services of EDUROAM wireless network is set up [[wifi password>>doc:uzivatel.hesla.wifi-heslo.WebHome]].
78
79 The user name must be entered in form (% style="color: rgb(204, 0, 0);" %)**login@domain**(%%) (e.g. abc123@vsb.cz).
80 Where "login" is your VSB-TUO **login **name.
81 And "domain" is **vsb.cz** .
82 Also type in the [[**wifi password**>>doc:uzivatel.hesla.wifi-heslo.WebHome]] (WiFi password is not identical with a single LDAP password!)
83 Leave Logon domain blank.
84
85 [[[[image:9.png||width="203"]]>>attach:9.png||rel="__blank"]]
86