Last modified by Denisa Wernerová on 29.08.2017 12:45
Show last authors
1 To gain access to cable networks at the dormitory you must perform the following steps:
2
3 **~1. Setting **[[wifi password>>uzivatel.hesla.wifi-heslo.WebHome]]
4
5 **2. Setting properties of TCP / IP protocol**
6
7 * To assign an IP address from a DHCP server you must have an Ethernet adapter with the following settings:
8 ** [[For protocol TCP/IPv4 and IP version 6 you must have selected Obtain an IP address from a DHCP server and Obtain DNS server address automatically.**.**>>tcp-ip-win7]]
9
10 * Note .: if you have the IP address set manually (eg. from home), IP address will not release from a DHCP server and the device won't connect to a network.
11
12
13 **3. Network settings:**
14
15 1. Right-click the **Start **icon and continue through the **Computer Managment.**
16 \\[[[[image:1en.png||width="248"]]>>attach:1en.png]]
17
18 1. Select **Services And Applications.**
19
20 [[[[image:2en.png||width="680"]]>>attach:2en.png]]
21
22 1. Select **Services.**
23
24 [[[[image:3en.png||width="680"]]>>attach:3en.png]]
25
26 1. In the list of services, locate the service called **Wired AutoConfig Service**, click the right button and select **Start.** If it is already running, continue to the next point.
27
28 [[[[image:4en.png||width="680"]]>>attach:4en.png]]
29
30 1. Again, right click and choose** Properties.**
31
32 [[[[image:5en.png||width="680"]]>>attach:5en.png]]
33
34 1. On the **General** tab set Startup type: **Automatic** and click **OK.** Computer Management window with a list of services can be closed.
35
36 [[[[image:6en.png||width="326"]]>>attach:6en.png]]
37
38 1. Now right click on the icon indicating access to the Internet and select **Open Network and Sharing Center**.
39
40 [[[[image:7en.png||width="239"]]>>attach:7en.png]]
41
42 [[[[image:8en.png||width="256"]]>>attach:8en.png]]
43
44 1. Continue through the **Change adapter settings**.
45
46 [[[[image:9en.png||width="680"]]>>attach:9en.png]]
47
48 1. Right click on the **Ethernet **network connection and select **Properties.**
49
50 [[[[image:10en.png||width="680"]]>>attach:10en.png]]
51
52 1. On the **Authentication** tab, check** Enable IEEE 802.1X authentication**, remember my** Credentials for this connection each time I´m logged on** and **Fallback to unauthorized network access**. Subsequently continue through the **Settings.**
53
54 [[[[image:11en.png||width="298"]]>>attach:11en.png]]
55
56 1. Press the **Configure **button and make sure that the option **Verify the servers's identity by validating the certificate** and **Automatically use my Windows logon name and password** ... is (% style="color: rgb(204, 0, 0);" %)**UNCHECKED**(%%). Select **OK **and **OK **again.
57
58 [[[[image:12en.png||width="680"]]>>attach:12en.png]]
59
60 1. Back on the **Authentication **tab and select **Additional Settings.**
61
62 [[[[image:13en.png||width="298"]]>>attach:13en.png]]
63
64 1. Select the option for the **Specify authentication mode** → **User authentication**. Confirm **OK.**
65
66 [[[[image:14en.png||width="315"]]>>attach:14en.png]]
67
68 1. Now you should be receive the login window, where fill the login in form (% style="color: rgb(204, 0, 0);" %)**login@vsb.cz**(%%) (eg. abc123@vsb.cz) and your [[**wifi password**>>doc:uzivatel.hesla.wifi-heslo.WebHome]]. **Confirm OK. **(% style="color: rgb(204, 0, 0);" %)Warning:(%%) it may happen that the login window is displayed in the background below the all active windows, so if you don´t see offers to log in, try to minimize all other open windows..
69
70 [[[[image:15en.png||width="680"]]>>attach:15en.png]]
71
72 1. Now the computer should be connected to the network tuonet successfully .\\
73
74 ~* In case of any problems with connection via cable network outside the dormitory, try to deselect "Allow authentication IEEE 802.1X" in section 10 of this manual.
75
76
77 (% style="color: rgb(204, 0, 0);" %)**LIMITATIONS**(%%) (dokud je zařízení připojeno k síti dle výše uvedených kroků):
78
79 * You can not use Hyper V virtual switch in the system,
80 * Unable to connect to the system remote desktop via protocol RDP.